KELOWNA, BC , Sept. 26, 2022 /CNW/ - Cantex Mine Development Corp. (TSXV: CD) (OTCQB: CTXDF) (the "Company") is pleased to provide an update on drilling of the Main Zone at its 100-percent-owned 14,077 hectare North Rackla claim block in the Yukon .
Dr. Charles Fipke reports
Cantex is pleased to report the first results from its 2022 drill program at the Main Zone of the North Rackla project. To date results from three holes have been received. These results confirm that the Main Zone mineralization continues to the northeast in the Discovery Sector. The results from these three holes are presented in Table 1.
Holes YKDD22-243 and YKDD22-244 are drilled from pad MZ52A while YKDD22-245 was drilled from pad MZ52. All these holes intersected mineralization 50 metres beyond drilling completed in 2021, bringing the strike length to 2,150 metres. Additional drilling is now underway further to the northeast, from which results are awaited, that has extended the mineralization a further 150 metres, bringing the drill confirmed strike length to 2,300 metres.
The drill collar location of these holes is shown on Figure 1. A cross section through these holes is presented in Figure 2.
Table 1. Significant results from Discovery Sector
Results have also been received from 8 holes drilled at the GZ Zone. These holes were drilled in covered areas to help define controlling structures and did not intersect significant mineralization.
Cantex has completed 54 holes on the North Rackla project so far during the 2022 season. Results from 36 of these holes are still awaited and will be reported when received.
The drill team will shortly go on a two week break as mandated by the Yukon Workers' Safety and Compensation Board and will be back drilling on October 7 th .
The drill holes reported in this press release were drilled using HQ (63.5mm) diamond drill bits. The core was logged, marked up for sampling and then divided into equal halves using a diamond saw on site. One half of the core was left in the original core box. The other half was sampled and placed into sealed bags which were in turn placed into larger bags closed with security seals prior to being transported to CF Mineral Research Ltd. in Kelowna, BC .
At CF Minerals the drill core was dried prior to crushing to -10 mesh. The samples, which averaged over 3kg, were then mixed prior to splitting off 800g. The 800g splits were pulverized to -200 mesh and a 250g split was sent for assay. Quality control procedures included running a barren sand sample through both the crusher and pulveriser between each sample to ensure no inter-sample contamination occurred. Silica blanks were inserted along with certified reference samples. These quality control samples were each inserted approximately every 20 samples.
ALS Chemex in Vancouver assayed the samples using a four-acid digestion with an ICP-MS finish. The 48 element ME-MS61 technique was used to provide a geochemical signature of the mineralization. Where lead or zinc values exceeded one percent the Pb-OG62 or Zn-OG62 techniques were used. These have upper limits of 20% lead and 30% zinc respectively. Samples with lead and zinc values over these limits were then analyzed by titration methods Pb-VOL70 and Zn-VOL50. Where silver samples exceeded 100 g/t the Ag-OG62 technique was used which has an upper limit of 1,500 g/t. The over limit analyses contributed to delays in receiving final assay results.
The technical information and results reported here have been reviewed by Mr. Chad Ulansky P.Geol ., a Qualified Person under National Instrument 43-101, who is responsible for the technical content of this release.
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. Information set forth in this news release includes forward-looking statements under applicable securities laws. Forward-looking statements are statements that relate to future, not past, events. In this context, forward-looking statements often address expected future business and financial performance, and often contain words such as "anticipate", "believe", "plan", "estimate", "expect", and "intend", statements that an action or event "may", "might", "could", "should", or "will" be taken or occur, or other similar expressions. All statements, other than statements of historical fact, included herein are forward-looking statements. By their nature, forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements, or other future events, to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. Such factors include, among others, risks identified in the management discussion and analysis section of the Company's interim and most recent annual financial statements or other reports and filings with Canadian securities regulators. Forward looking statements are made based on management's beliefs, estimates and opinions on the date that statements are made and the respective companies undertake no obligation to update forward-looking statements if these beliefs, estimates and opinions or other circumstances should change, except as required by applicable securities laws. Investors are cautioned against attributing undue certainty to forward-looking statements.
SOURCE Cantex Mine Development Corp.